Brakes & Components

3/8x24 brass male fitting to suit 3/16 copper pipe

3/8x24 brass female fitting to suit 3/16 copper pipe

7/16x20 male brass fitting to suit 3/16 copper pipe

3/8x24 brass male to male adaptor

Swivel Throttle Cable Stop (Single Cable) Solderless Nipple Suits Bulkhead side and underfoot side assemblies

A handy stainless steel swivel fitting allowing two throttle cables to be attached to the Tilton bulkhead side or underfoot assemblies

Hydraulic brake light switch 3/8 UNF thread to suit the port on the Tilton 76 Series Cylinders

Flexible air intake hose / brake duct hose, -50 till +200° celcius. Suitable for brake cooling or to provide your engine/car with fresh air, etc. Price is per meter but sold in 4mtr lengths. Please select diameter required from the options...

Racing Brake Fluid 700 Factory Line 100% Synthetic Racing Fluid – DOT 4 Very high boiling point: 336°C / 636.8°F For hydraulic actuated brake and clutch systems TYPE OF USE Motul (Racing Brake Fluid) RBF 700 is a high-performance brake...

3/8x24 3 sided brass t-piece

Flexible silicone duct hose Single ply duct hose. Temperature range: -80°C to 310°C. Used for brake cooling, duct hose, fresh air The price is a per metre but sold in four metre lengths. Please select the diametre...

Pressure regulator with lever Brisca type Adjusting the brake distribution between the front wheels and the rear wheels (0-60%) Material: aluminum Input and output tapping: 3/8 x 24 Operating range: 1200 PSI - 100 PSI Weight: approx. 115...

Dial / Screw Brake Pressure Controller Adjusting the brake distribution between the front and rear wheels (0-60%) Material: aluminum Input and output jack: 3/8 x 24 Weight: approx. 125 gramms Input and output adapters sold separately

RedSpec aster cylinders without reservoir  This type of light alloy master cylinder is most often used when the space is confined & the brake fluid reservoir is placed remotely in a more accessible location. Stem: 5/16 UNF. Entry...

RedSpec master cylinders with integrated fluid reservoir  This type of light alloy master cylinder is most often used when the space dedicated to it is sufficient for easy access to the reservoir. Stem: 5/16 UNF. Port threads:...

AP Racing brake disc/bell fixing kit Sold in sets to suit one disc/bell assembly

Radi-CAL™ R4 Racing Brake Fluid - CP6005 The Radi-CAL™ R4 Fluid has been designed to perform better than any other product at the extremes of heavy duty braking performance in the top levels of racing.With the highest dry boiling...

Tilton brake cylinder fluid reservoir bottle Choice of 7/16x20 bulkhead mount or Direct Mount