Seat Fixtures

Zinc plated steel bracket designed to stop the bolt pulling thru the slotted seat bracket. Sold each. 4 brackets required per seat. Alloy Seat brackets sold separately.

Drill Jig for drilling the FIA Seating mounting Kits. Simply Clamps on. Supplied with 14mm Drill bit. Designed to make fitting of the Seat mounting kits easier.

These single piece side mount brackets are made from 3mm thick steel. Produced in accordance with Annex J. therefore compliant with the FIA requirements The product is bent on CNC press brakes. Black powder coated European Manufactured Sold as...

Seat Mounting Rail c/w Floating Boss Ready to weld into place. Complete with rails, support plates and floating bosses for mounting the seat bracket.

Motorsport Ireland approved alloy seat side mounts replacement rails with 4xM8 x 25mm bolts & load spreading washers  

FIA Approved Steel material 350mm Length 3mm thickness

These FIA compliant universal alloy seat side mounts are a multi piece design machined from high grade 5 mm aluminium, making them strong yet very lightweight at under 1.5kg per seat. These Seat Brackets will give the maximum adjustment for any side...

Not FIA Approved Sliding rail to be mounted between the bracket and the seat Steel material

Steel material 3mm thickness 'Y' Fitment

FIA Approved Side Mounted model 380mm length 3mm Thickness Ultrastrong material

Universal Weld In Seat Rail Mounting / Subframe Kit - FIA and MSA / MSUK approved type. The correct kit as per FIA drawings.  35 mm Seamless tubes ready to be drilled to suit your seat mounts. Counter Plates supplied with pre-welded nuts, welds...

Not FIA Approved Material Aluminium Universal couple of brackets for seat with base mounting attachments

New multi hole aluminium seat bracket in compliance with FIA Appendix J art. 253. New design Minimum 36 different positions Length: 495 mm Thickness: 6 mm

FIA Approved Aluminium Material 495mm length 6mm thickness Equipped with a damper